Table of Contents
Advertisement
Section 3: Checklists & Maneuvering Suggestions
3A: Operating Checklists - OceanFlyer
First Thing Each Day:
Q Turn off anchor light if illuminated.
Q Check engine oil, coolant.
Q Check under-engine oil pads. Okay?
Q Check fuel tank levels (use Garmin GMI 20, Maretron GSM 250, or Sight Gauges). Q
Check holding tank indicator in both heads. Need pumping?
Starting Engines:
Q All lines clear of propellers and on deck.
Q Items running on AC evaluated vis-a-vis the Inverter and Generator.
Q DC Panel switches "On" (Page 4.20), DC Panel Main Battery Switch on "ALL"
Q Naiad Stabilizers "Off" (Page 4.46)
Q Battery selector switch to "House"
Q Throttles retarded to idle, shift levers in "neutral".
Q Start engines in turn.
Q If engines do not turn over, see "What to Do If".
Q When engines start: Naiad Stabilizers "Center" (Page 4.46)
Just Before, Just After Leaving Dock:
(Only 3-4 minute engine warmup required!)
Q Shore power switch "Off".
Q Shore power cord removed, stowed aboard.
Q Boarding ladder aboard, if used.
Q Lines removed as appropriate.
Q Fenders hauled aboard and stowed.
Q Lines and other deck gear secure/stowed.
Q Doors and hatches closed and secured as appropriate.
(Checklists for Underway, Approaching & Arriving at Dock, etc. continue...)
Section 3A: Operating Checklists 3.1
Engine start buttons.
The Boarding ladder MUST be
brought aboard BEFORE leaving
the dock!
Advertisement
Table of Contents
