Embroidery Stitch Out Pop-Up Messages - Viking Designer EPIC User Manual

Embroidery Stitch Out Pop-up
Messages
The Embroidery Arm Needs to Calibrate
When the embroidery unit is attached, a pop-up message will
appear and inform you to slide off the hoop and clear the
machine area for calibrating the embroidery arm. You will
also be reminded to attach a suitable embroidery foot.
It is very important to remove the hoop, otherwise the hoop or
the embroidery unit may be damaged while calibrating.
Attach Hoop
If the hoop attached to the machine does not match the
hoop that is selected and displayed on the screen, the
machine will not embroider. You must change the hoop to
the one displayed on the screen or return to embroidery edit
and select the hoop to match the attached hoop.
The hoop needs to be inserted properly for the machine to
detect it. Slide the hoop connector into the hoop attachment
from front to back until it clicks into place.
9 Embroidery Stitch Out 145