Touch Functions; Position; Rotate - Viking Designer EPIC User Manual

Touch Functions

You can position, rotate, scale and pan directly on the multi-
touch screen using your fingers. Touch & hold on a touch
function to lock it. This will prevent activation of another
touch function by mistake when working with your design(s)
directly on the multi-touch screen. Select any touch function
to unlock.
Touch function pan is locked

Position

Touch and move a selected design with your finger to
position it anywhere in the embroidery area. The touch
function, position, will automatically be activated.
You can also select the touch function, position, to activate
position and use the wheel to adjust the position of the
selected design(s). The numbers above the position button
show, in millimeters, the horizontal and vertical distance from
the center of the hoop for the selected design(s).
Touch the center of the control wheel to position the
selected design(s) in the center of the hoop.
Touch & hold on the position button to lock it and prevent
activation of another touch function by mistake. A padlock
below the button indicates that the function is locked. Select
any touch function to unlock.

Rotate

Rotate the selected design(s) by touching the rotate handle
located in the center of the top of the design selection frame
and move your finger on the screen. The touch function,
rotate, will automatically be activated.
You can also select the touch function, rotate, to activate
rotate and use the arrows in the wheel to adjust the rotation
of the selected design(s) in one degree increments. Each
touch in the center of the control wheel will rotate the
selected design(s) 90 degrees clockwise. The number above
the rotate button shows, in degrees, the current rotation
angle.
Touch & hold on the rotate button to lock it and prevent
activation of another touch function by mistake. A padlock
below the button indicates that the function is locked. Select
any touch function to unlock.
8 Embroidery 113