Change Thread
When it is time to change the upper thread, the machine will
stop. Change the spool of thread and re-thread the machine.
The recommended thread color number is shown in the pop-
up message.
Cut and Remove the Thread Tail
After changing the thread, the machine will sew a few
stitches and then stop so you can cut the thread tail.
Note: When automatic thread cutter and automatic jump stitch trim
function is selected in temporary embroidery settings, the thread will be
cut automatically and no cut thread tail pop-up will be shown. Simply
remove the thread tail that has been cut.
Your Embroidery is Finished
A pop-up message and sound informs you that your
embroidery is finished. When the pop-up is closed the design
will stay loaded in embroidery stitch out and you can stitch
the same embroidery again, including any changes you have
made.
9 Embroidery Stitch Out
147