Trim Position; Center/Remove Hoop Position - Viking Designer EPIC User Manual

Trim Position

Trim position will move the hoop towards you, making it
easier to trim threads and fabric for specialty techniques.
Tip: You can also use the needle up/down button on your machine as a
shortcut to move the hoop to trim position.

Center/Remove Hoop Position

When you need to remove the hoop, e.g. when changing a
bobbin, touch the center/remove hoop position. This will
also show the center position of the hoop.
Tip: You can also use the stitch re-start button on your machine as a
shortcut to move the hoop to center/remove hoop position.
9 Embroidery Stitch Out 137