Temporary Embroidery Settings; Deluxe™ Stitch System; Embroidery Foot Type - Viking Designer EPIC User Manual

teeth are lowered when sewing on buttons or when free
motion sewing.
Select up and the feed teeth will be raised for all sewing.
Select down and the feed teeth will be lowered for all sewing.
Note: Regardless of which option is selected the machine will always
automatically lower the feed teeth when raising the presser foot to extra
lift position.
Note: The feed teeth options will automatically be reset to auto at the
start of a new project from the JoyOS advisor™ feature.

Temporary Embroidery Settings

Change your temporary embroidery settings when you would
like to change an embroidery related setting for your current
project. Changes made to the temporary embroidery settings
will be reset at the start of a new project from the JoyOS
advisor™ feature. When turning the machine off, all changes
made in temporary embroidery settings will be reset to
default.
The following settings can be set in temporary embroidery
settings:
• deLuxe™ stitch system

• Embroidery foot type

• Thread cut options
deLuxe™ Stitch System
When the deLuxe™ stitch system is selected your
DESIGNER EPIC™ will automatically choose the best way
to control the embroidery upper thread based on the design
and the selected settings: thread portioning or thread tension.
For best embroidery results we strongly recommend that you
keep this setting selected and select the spring foot for
embroidery foot type.
When the deLuxe™ stitch system is selected thread
portioning will be used when the embroidery foot type,
spring foot, is selected unless, e.g. the active color block
indicates a felting color block or a cutwork needle color
block in the color block list.
When the deLuxe™ stitch system is deselected and/or
embroidery foot type is set for floating foot, thread tension
will be used for all designs and settings.
For some specific special techniques and accessories that
cannot be embroidered with thread portioning, the deLuxe™
Stitch System needs to be deselected.
Embroidery Foot Type
Select either the Sensor Q-Foot or floating foot. It is very
important that the correct setting is selected for the attached
embroidery foot.
For best embroidery results, select and use the Sensor Q-
Foot and the deLuxe™ stitch system. This is strongly
162 11 Settings