Table of Contents
Advertisement
Getting Started with WiFi and
mySewnet™ Cloud
Follow the steps below to connect your machine.
Connect to a Network with WiFi
Touch the WiFi button in the top left corner of the screen.
Select from the list of available networks. If your network is
password protected, you will be prompted to enter the
password to connect.
WiFi button
For more information, see WiFi Introduction.
Connect to mySewnet™ Cloud
When you have established a WiFi connection, touch the
cloud button next to the WiFi button on the screen. Touch
the button to sign in. A web view opens where you can log
in. If you do not have a user name and password, select
mySewnet™ cloud button
Register to create an account.
For more information, see mySewnet™ Cloud.
LED Lights
Your machine has LED lights which distribute the light
evenly over the sewing area and eliminate shadows. You can
adjust the brightness of the light in the settings menu, see
LED Work Light Brightness .
Free Arm
To use the free arm, slide off the accessory tray. When
attached, a hook keeps the accessory tray locked to the
machine. Remove the tray by sliding it to the left.
Manual Thread Cutter
There are three manual thread cutters on your machine. The
first one is close to the bobbin winder spindle for cutting the
thread before and after winding.
The second one is next to the bobbin area for cutting the
bobbin thread after placing the bobbin in the machine.
The third one is on the left side of the machine for manually
cutting top and bobbin threads. Pull both threads into the
cutter from the back to the front and pull down quickly.
26
2 Preparations
- Quick Links:
- Design Positioning
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the Designer EPIC and is the answer not in the manual?
Questions and answers
Does epic 1 have stitch regulator
Does epic designer have a stitch regulator
The Viking Designer EPIC has the EXCLUSIVE SENSOR SYSTEM™ technology, which automatically senses and adjusts for fabric thickness to ensure even feeding. However, there is no mention of a dedicated stitch regulator for free-motion quilting.
This answer is automatically generated
i need a stretch stitch
To use the stretch stitch on the Viking Designer EPIC:
1. Go to the JoyOS Advisor™ on the machine.
2. Select the type of fabric—choose "Stretch Medium" if that's what you're using.
3. Select the type of sewing—choose "Seam" if sewing a seam.
4. The machine will automatically:
- Pick the correct stretch stitch.
- Adjust the stitch length.
- Set the correct presser foot pressure.
- Adjust thread tension if needed.
- Recommend using a size 90 stretch needle.
Then, attach the correct presser foot and start stitching. The selected stretch stitch is reinforced and will stretch without popping.
This answer is automatically generated