Viking Designer EPIC User Manual page 103

Check Upper Thread
The machine stops automatically if the upper thread runs out
or breaks. Re-thread the upper thread, close the pop-up
message and start sewing.
Remove Sensor One-Step Buttonhole Foot
The Sensor One-Step Buttonhole Foot is used only for
buttonholes. A pop-up message will advise you to remove
the foot for all other sewing.
Cannot Use the Automatic Needle Threader
If using a twin needle, touch OK and thread it manually. If
using a regular needle, touch OK and deselect twin needle in
the settings. Press the automatic needle threader button
again.
7 Sewing 103