Section 1. Heater Identification; Heater Data Rating Plate - Waterco Turbotemp 200HD Installation And Operation Manual

HEATER IDENTIFICATION INFORMATION (HIN)
To identify the heater, see the data rating plate on the inner front panel of the heater. There
are two designators for each heater, one is the Model Number and the other is the Heater
Identification Number (HIN).
Heater Identification Number (HIN)
The following example simplifies the identification system:
1. MT : Turbotemp
2. Model Size : (200, 300 or 400) : Input rating (Mega Joule [MJ]/hr)
3. Construction : (HD = Heavy Duty Model)
4. Fuel Type : (LP = Propane gas or N = Natural gas)
ID DESIGNATOR FOR WATERCO WATER POOL & SPA TURBOTEMP HEATERS
Example:
1
MT

HEATER DATA RATING PLATE

The heater data rating plate is located on the inner front panel of the heater. To access the data
rating plate, unbolt and remove the side door access panel as shown below.
Heater Data Rating Plate Location
Top Panel
Door
Access Panel
H. I. N.
HEATER IDENTIFICATION NUMBER
2 3 4
300 HD N
Door
Access
Panel
Section 1. Heater Identification Information
N = NATURAL GAS
FUEL TYPE =
LP = PROPANE GAS
HD = HEAVY DUTY MODEL
MODEL SIZE = MJ INPUT = Mega Joule [MJ] / HR
200 (200[MJ]/ HR), 300 (300[MJ]/ HR) or 400 (400[MJ] /HR)
MT = TURBOTEMP
I pg 02