Brake Release / Free Wheel Operation - Shoprider Valencia User Manual

Horn (4)
The yellow button operates the scooters horn.
Note:
This should only be used to warn others of your presence and not as a rebuke of any form.
On / Off Key Switch (5)
Insert the key supplied with the scooter and turn clockwise. The battery gauge needle will move.
There may be a slight delay before the thumb levers operate as the controller checks the
scooters circuits.
Note:
Never leave the key in the switch unattended to prevent unauthorised use. Do not switch
the power off to stop the scooter unless it is an emergency. The scooter will stop very
abruptly if stopped in this way.
Lights Switch (6)
This button operates the lights.
Hazard Warning Lights (7)
This button operates the hazard warning lights.
Indicator Switch (8)
This button operates the indicators.

Brake Release / Free Wheel Operation

The brake release lever is situated under the seat at the
left rear of the scooter. This lever allows you to disengage
the drive mechanism and push the scooter in 'freewheel'
mode. To disengage the drive, push the knob forward
to the 'disengaged' position. The scooter can now be
pushed.
Simply pull the lever back to re-engage the drive
mechanism (the scooter can now be driven). The scooter
will not operate when the lever is in the disengaged
position. The scooter must be turned off and on by
the key switch to reset the circuits before it will resume
normal operation. The scooter will bleep continually if the
brake is disengaged when it is switched on.
9
Fig 8