Analyzer Fault Code Listing - JLG 600A Service And Maintenance Manual

SECTION 6 - JLG CONTROL SYSTEM
DTC
001 EVERYTHING OK
002 GROUND MODE OK
0010 RUNNING AT CUTBACK - OUT OF TRANSPORT POSITION
0011 FSW OPEN
0012 RUNNING AT CREEP - CREEP SWITCH OPEN
0013 RUNNING AT CREEP - TILTED AND ABOVE ELEVATION
0014 CHASSIS TILT SENSOR OUT OF RANGE
0015 LOAD SENSOR READING UNDER WEIGHT
0035 APU ACTIVE
211 POWER CYCLE
212 KEYSWITCH FAULTY
213 FSW FAULTY
227 STEER SWITCHES FAULTY
2211 FSW INTERLOCK TRIPPED
2212 DRIVE LOCKED - JOYSTICK MOVED BEFORE FOOTSWITCH
2213 STEER LOCKED - SELECTED BEFORE FOOTSWITCH
2214 DRIVE/STEER LOCKED - JOYSTICK MOVED BEFORE ENABLE
2216 D/S JOY. OUT OF RANGE HIGH
2217 D/S JOY. CENTER TAP BAD
2218 L/S JOY. OUT OF RANGE LOW
2219 L/S JOY. OUT OF RANGE HIGH
2220 L/S JOY. CENTER TAP BAD
2221 LIFT/SWING LOCKED - JOYSTICK MOVED BEFORE FOOTSWITCH
2222 WAITING FOR FSW TO BE OPEN
2223 FUNCTION SWITCHES LOCKED - SELECTED BEFORE ENABLE
2224 FOOTSWITCH SELECTED BEFORE START
234 FUNCTION SWITCHES FAULTY - CHECK DIAGNOSTICS/BOOM
235 FUNCTION SWITCHES LOCKED - SELECTED BEFORE AUX POWER
236 FUNCTION SWITCHES LOCKED - SELECTED BEFORE START SWITCH
237 START SWITCH LOCKED - SELECTED BEFORE KEYSWITCH
259 MODEL CHANGED - HYDRAULICS SUSPENDED - CYCLE EMS
2513 GENERATOR MOTION CUTOUT ACTIVE
2514 BOOM PREVENTED - DRIVE SELECTED
2516 DRIVE PREVENTED - ABOVE ELEVATION
2517 DRIVE PREVENTED - TILTED & ABOVE ELEVATION
2518 DRIVE PREVENTED - BOOM SELECTED
2519 DRIVE PREVENTED - TILTED & EXTENDED OR HIGH ANGLE
2520 FUNCTIONS LOCKED OUT - CONSTANT DATA VERSION IMPROPER
2530 UMS SENSOR FORWARD LIMIT REACHED
2531 UMS SENSOR OUT OF USABLE RANGE
2532 UMS SENSOR BACKWARD LIMIT REACHED
6-48
Table 6-6. Analyzer Fault Code Listing
Analyzer Text
– JLG Lift – 3121201