JLG 600A Service And Maintenance Manual page 75

8. Loosen the retaining nut of the stopper max flow and
remove it.
9. Turn in the stopper max flow to get swivel angle
zero.
10. Disassemble the rotary group in horizontal position.
11. Disassemble the stopper - max. flow.
3121201
SECTION 3 - CHASSIS & TURNTABLE
12. Remove the threaded pin (stopper - max.flow)
13. Disassemble the plug.
14. Disassemble the control piston while moving the
swash plate.
15. The swash plate must be lifted a little bit to disas-
semble the piston rod.
– JLG Lift – 3-25