JLG 600A Service And Maintenance Manual page 296

SECTION 6 - JLG CONTROL SYSTEM
Table 6-5. Machine Configuration Programming Information Software Version P6.1 to Present
Configuration Label/
Digit
STARTER LOCKOUT:
6
ENGINE SHUTDOWN:
7
TILT:
8*
* Certain market selections
will limit tilt options and alter
default setting.
Note: Any of the selections
above will light the tilt lamp
when a tilted condition
occurs and will sound the
platform alarm when the
machine is also above ele-
vation.
JIB:
9*
* Only visible under certain
model selections.
4 WHEEL STEER:
10*
* Only visible under certain
model selections.
SOFT TOUCH:
11*
* Only visible under certain
model selections.
6-42
Number
0 DISABLED: Automatic pre-glow time determined by ambient air temperature; engine
start can be attempted at any time during pre-glow.
1 ENABLED: Automatic pre-glow time determined by ambient air temperature; engine
start is NOT permitted until pre-glow is finished.
0 DISABLED: No engine shutdown.
1 ENABLED: Shutdown engine when coolant temperature is greater than 110 deg. C or the
oil pressure is less than 8 PSI.
1 5 DEGREES: Reduces the maximum speed of all boom functions to creep when tilted
more than 5 degrees and above elevation; also reduces drive speed to creep.
2 4 DEGREES: Reduces the maximum speed of all boom functions to creep when tilted
more than 4 degrees and above elevation; also reduces drive speed to creep.
3 3 DEGREES: Reduces the maximum speed of all boom functions to creep when tilted
more than 3 degrees and above elevation; also reduces drive speed to creep.
4 4 DEGREES + CUT: Reduces the maximum speed of all boom functions to creep when
tilted more than 4 degrees and above elevation; also disallows tower lift up, tower tele-
scope out, drive, main telescope out and main lift up.
5 3 DEGREES + CUT: Reduces the maximum speed of all boom functions to creep when
tilted more than 3 degrees and above elevation; also disallows tower lift up, tower tele-
scope out, drive, main telescope out and main lift up.
0 NO: No jib installed.
1 YES: Jib installed which has up and down movements only.
0 NO: No four-wheel steer installed.
1 YES: Four-wheel steer installed.
0 NO: No soft touch system installed.
1 YES: Soft touch system installed.
Description
– JLG Lift –
Default
Number
0
1
1
0
0
0
3121201