JLG 600A Service And Maintenance Manual page 295

Table 6-5. Machine Configuration Programming Information Software Version P6.1 to Present
Configuration Label/
Digit
ENGINE:
3*
* Engine selections vary
depending on model selec-
tion.
FLYWHEEL TEETH:
4*
* This menu item is only
visible if Deutz engine
selections 3 or 4 are
selected.
GLOW PLUG:
5
3121201
Number
1 FORD EFI GAS: Ford LRG425 EFI Gas (Tier 1)
2 FORD EFI D/F: Ford LRG425 EFI dual fuel (Tier 1)
3 DEUTZ F4 TIER1: Deutz F4M1011F Diesel (Tier 1)
4 DEUTZ F3 TIER1: Deutz F3M1011F Diesel (Tier 1)
5 CAT. 3024C: CAT 3024C Diesel (Tier 2)
6 CAT. 3044C: CAT 3044C Diesel (Tier 2)
7 PERKINS 404C (Tier 2)
8 DEUTZ F4 TIER2: Deutz F4M2011 Diesel (Tier 2)
9 DEUTZ F3 TIER2: Deutz F3M2011 Diesel (Tier 2)
10 FORD GAS TIER2: Ford LRG425 EFI Gas (Tier 2)
11 FORD D/F TIER2: Ford LRG425 EFI Dual Fuel (Tier 2)
12 DEUTZ ECM: Engine Control Module - ECM (Tier 2 and Tier 3)
13 DUAL FUEL ECM: GM/PSI 3.0L Dual Fuel (Tier 2)
14 PERKINS ECM
15 CAT ECM
0 133 TEETH: 133 flywheel teeth.
1 110 TEETH: 110 flywheel teeth.
0 NO GLOW PLUGS: No glow plugs installed.
1 AIR INTAKE: Glow plugs installed in the air intake on the manifold.
2 IN-CYLINDER: Glow plugs installed in each cylinder.
SECTION 6 - JLG CONTROL SYSTEM
Description
– JLG Lift –
Default
Number
14
1
2
6-41