Using The Lan Ipv6 Option - Ubee DVW32CB Subscriber User Manual

Ubee Interactive
Enable Rapid Commit
Enable Unicast
Apply
Restore DhcpV6 Defaults
5.4

Using the LAN IPv6 Option

Use the LAN IPv6 option to connect clients with LAN IPv6 addresses.
Steps
To configure LAN IPv6 settings:
1. Click Basic from the main menu.
2. Click LAN IPv6 from the left side menu. Field descriptions are listed below the screen
example.
Ubee DVW32CB Advanced Wireless Voice Gateway Subscriber User Guide • January 2015
Label
Enables Rapid Commit. When enabled, the server recognizes
this option in Solicit messages sent from the DHCPv6 client.
The server and client then use a two-message exchange
(Solicit and Reply) to configure clients, rather than the default
four-message exchange (Solicit, Advertise, Request, and
Reply). This provides faster client configuration when networks
are under heavy traffic loads.
Enables Unicast, which is disabled by default. Unicast
transmission is defined to be between a single sender and a
single user over a network.
Saves changes.
Restores default DHCPv6 values.

Using the LAN IPv6 Option

Description
37