Ubee Interactive
Battery Charge Module Software
Driver
Built
Battery Status
Current Power Source
Charger State
Number of Batteries
Input Voltage
Temperature
Estimated Time Remaining
11.2
Using the UPS Option
The UPS option displays information about the uninterrupted power supply.
Steps
To view UPS information:
1. Click UPS from the left side menu. Field descriptions are listed below the screen
example.
Ubee DVW32CB Advanced Wireless Voice Gateway Subscriber User Guide • January 2015
Label
Description
Describes the driver used in the software.
Indicates the date and time the battery was manufactured.
Displays the power source for the device, such as Utility
through the power cord or internal battery power.
Displays the status of the battery, such as Sleep or Idle.
Indicates the number of batteries in the device.
Displays the input voltage in millivolts (mV).
Displays the battery temperature in Celsius.
Displays how much time is left on the battery in minutes.
Using the UPS Option
99