Using The Dmz Host Option; Steps - Ubee DVW32CB Subscriber User Manual

Ubee Interactive

Steps

To configure a pass through table:
1. Click Advanced from the main menu.
2. Click Pass Through from the left side menu. The pass through fields are explained
following this screen example.
Pass Through MAC Addresses
Add MAC Address
Addresses entered: n/32
Remove MAC Address
Clear All
6.8

Using the DMZ Host Option

Use the DMZ Host option to expose a host IP address to the WAN (public Internet). You
can use this option when applications do not work with port triggers or other networking
strategies.
Steps
To set up a DMZ host:
1. Connect a PC to an Ethernet port on the DVW32CB. Make sure both devices are
powered on and functioning.
2. Connect a Home Gateway (or other device you wish to be in the DMZ) to an Ethernet
port on the DVW32CB.
Ubee DVW32CB Advanced Wireless Voice Gateway Subscriber User Guide • January 2015
Label
Defines the input host's MAC address.
Adds the input host's MAC address.
Displays the MAC addresses to be blocked. The number of
MAC addresses is shown as 0/32 where 0 is the number of
addresses in the list. You can add up to 32 MAC addresses at
one time.
Removes the input host's MAC address.
Removes all of the input host's MAC addresses.

Using the DMZ Host Option

Description
60