Using The Wireless Radio Option - Ubee DVW32CB Subscriber User Manual

Ubee Interactive
9.2

Using the Wireless Radio Option

The Radio option is used to configure the wireless radio, including channel number, and
bandwidth control.
Steps
To configure wireless operations:
1. Click Wireless from the main menu.
2. The Radio screen is displayed. Field descriptions are listed below the screen example
(the screen example shows the 2.4GHz radio selected).
Wireless Interface
Wireless Status
Channel Bandwidth
Wireless Channel
Ubee DVW32CB Advanced Wireless Voice Gateway Subscriber User Guide • January 2015
Label
On the top left side of the screen, you can select either the
2.4GHz or 5GHz radio band to configure.
NOTE: This is an indicator of which band you are actively
configuring, both radios are enabled automatically.
Displays the selected wireless radio's status, Enabled or
Disabled.
Sets the channel bandwidth and displays the current channel
bandwidth.


Set to Auto by default, the Wireless Channel selects a specific
channel to deploy the wireless network. This allows you to set
the operating frequency/channel depending on your particular
region. Channel selection can have an impact on wireless
networking performance. For more information, refer to
Selecting a Wireless Channel on page
The current channel is displayed as well as the interference
level.
Description
For the 2.4GHz radio, options are 20MHz (default value)
or 20/40MHz.
For the 5GHz radio, options are 20MHz, 20/40MHz, or
20/40/80MHz (default value).

Using the Wireless Radio Option

90.
74