Ubee DVW32CB Subscriber User Manual page 58

Ubee Interactive
f. Test your local host or application such as your Xbox to see if it is functioning
properly. Continue with port forwarding if the host or application is not
communicating correctly.
2. Assign a Static IP lease to the client/host to which you are setting up forwarding. This
way, the IP does not change and disrupt your forwarding rules. For example, if you are
hosting a Web server in your internal network, and you wish to setup a forwarding rule
for it, assign a static IP lease to that system to keep the IP from renewing and
disrupting the forwarding rule.
6.5.2 Setting Up Forwarding
If the suggestions in
communication problem, use port forwarding.
You need the following information to set up port forwarding:
 IP address of each local host system (for example, Xbox) for which you need to setup
a port forwarding rule.
 Port numbers the local host's application listens to for incoming requests/data (for
example, a game or other service). These port numbers should be available in the
documentation associated with the application.
Note
For detailed information on port forwarding, including how to set it up for specific
applications using specific network devices (for example, cable modems), refer to:
http://portforward.com
Steps
To set up port forwarding:
1. Access the Web interface of the DVW32CB, see
Locally on page
2. Click Advanced from the main menu.
3. Click Forwarding from the left menu.
4. Click either Create IPv4 or Create IPv6.
Ubee DVW32CB Advanced Wireless Voice Gateway Subscriber User Guide • January 2015
Before Setting Up Forwarding on page 53
or consult your host device or application user manual.
14.
Using the Forwarding Option
did not correct your
Accessing the Web User Interface
54