Instruction Format - Mitsubishi Electric 700 Series Programming Manual

3.19 Instruction Format

(1) Many of the instructions can be divided into an instruction part and a device, and
their applications are as described below.
Instruction part ..... Indicates the function of that instruction.
Device ..... Indicates the data used with the instruction.
(2) The instruction format can be roughly classified as follows according to the
instruction part and device combinations.
Instruction part
1)
Example
END
Instruction part
2)
Example LD
Instruction
3)
part
Example
4) Others ............... Combinations other than the above 1) to 3).
.....This instruction does not change the device status and
mainly controls the program.
Device
+ .....This instruction performs ON/OFF control of
X0
Device
Instruction part
Source Destination
+ +
device
MOV K100 D0
Destination device
Source device
Instruction part
the device, controls the execution condition
according to the ON/OFF status of the
device, and branches the program.
This
......
device
operation using the data of the
destination and source, and
stores the operation result into
the destination.
Instruction Format
instruction performs
3
97