Mitsubishi Electric 700 Series Programming Manual page 148

REMARKS
Seven steps are used when:
•
The digit designation of a bit device is not K4.
•
The beginning of a bit device is not a multiple of 8.
Program Examples
=
1) Program that compares the X0-F data and D3 data.
<>
2) Program that compares the BCD value 100 and D3 data.
>
3) Program that compares the BIN value 100 and D3 data.
<=
4) Program that compares the D0 and D3 data.
Basic Instructions
Coding
Coding
Coding
Coding
3
143