Connecting Usb Devices (Optional); Connecting Ps/2 Devices (Optional) - Medion P3 Revision 22 Operating Instructions Manual

5.7. Connecting USB devices (optional)

PLEASE NOTE!
Do not connect your USB devices until you have fin-
ished the initial setup of your new PC. This will prevent
any unnecessary interference during the installation.
These devices can generally be connected while the
PC is running. Please refer to the operating manual for
your peripheral device.
• The PC's USB voltage outputs are protected by a fuse (limited power source in
accordance with EN60950). This ensures that peripheral devices connected us-
ing the sockets in question cannot be damaged in the event of a technical fault
with the PC.
You will usually have several connection sockets available that you can use as de-
sired.
PLEASE NOTE!
Risk of damage!
Ensure that the plug and the socket fit together pre-
cisely in order to avoid any damage to the contacts.
Due to the arrangement of the contacts, the plug will
only fit into the socket in one position.
 Plug the device (printer, scanner, camera, etc.) into the appropriate socket.
PLEASE NOTE!
Where possible, always connect your devices to the
same port that they were originally installed on. Other-
wise they will be assigned a new ID and the drivers will
need to be reinstalled.

5.8. Connecting PS/2 devices (optional)

If you wish to connect a USB mouse or USB keyboard, then connection of a PS/2
mouse or keyboard is not necessary.
 Connect the mouse cable to the green PS/2 port.
 Connect the keyboard cable to the blue PS/2 port.
15 of 56