Table of Contents
Advertisement
Connect the corresponding data cable of the screen with the respective socket
of the graphics system.
Remove the white protective ring (if present) on the monitor plug.
Tighten the screws hand tight when connecting a VGA or DVI device to the
monitor cable.
4.3. Connecting HDMI devices
HDMI is an abbreviation for "High Definition Multimedia Interface", which is an
interface for the fully digital transfer of audio and video data.
You can connect a monitor, TV or projector to this socket if it has a
corresponding connection.
4.4. Connecting USB devices*
Do not connect your USB devices until you have finished the initial
setup of your new PC. This will prevent any unnecessary interference
during the installation. These devices can generally be connected while
the PC is running. Please refer to the operating instructions for your
peripheral device.
•
Several connection sockets are available for you to use as desired.
NOTICE!
Risk of damage!
Due to the arrangement of the contacts, the plug
will only fit into the socket in one position (with the
exception of USB type C).
Take care to ensure that the plugs and sockets fit
together precisely in order to avoid any damage to
the contacts.
Plug the device (printer, scanner, camera etc.) into the appropriate socket.
Observe the operating instructions for your peripheral devices and
always connect the devices to the required USB port with the
corresponding connection cable.
Please note that the performance of the device can be limited or the
device may not be supported when using a different USB port.
Where possible, always connect your peripheral devices to the same
port that they were originally installed on. Otherwise they will be
assigned a new ID and the drivers will need to be reinstalled.
20
Advertisement
Table of Contents
