Driver Support; Transport; Cleaning And Care - Medion P3 Revision 22 Operating Instructions Manual

We will try to help you over the telephone. Before contacting us, however, prepare
the following information:
• Have you made any upgrades or modifications to the initial configuration?
• What peripheral devices do you use?
• What messages, if any, appear on the screen?
• What software were you using when the problem occurred?
• What steps have you already taken to try and
rectify the problem?

21.5. Driver support

The system has been thoroughly and successfully tested with the installed drivers
in our test laboratory. It is normal in the computer sector, however, for the drivers to
need updating from time to time.
This is because there may be compatibility problems with other components (pro-
grams, devices) which have not yet been tested.

22. Transport

Please observe the following when transporting your PC:
• In order to avoid any transport damage, pack the PC away its original packaging.

23. Cleaning and care

By observing the following instructions, you can extend the operating life of your
PC:
PLEASE NOTE!
Risk of damage!
None of the parts inside the housing require cleaning
or maintenance.
• Always unplug the device and disconnect all cables before cleaning. Clean the
PC with a damp, lint-free cloth.
• Dust can clog up the vents which can lead to overheating and malfunctions. At
regular intervals (approx. every 3 months), check that the vents are providing a
sufficient level of air circulation. Use a vacuum cleaner to remove the dust from
the vents. If your device regularly attracts a lot of dust, then we also recommend
that the interior of the PC housing is cleaned by a specialist.
• Do not use solvents, corrosive or aerosol detergents.
• Do not use CD-ROM cleaning discs or similar products that clean the lens of the
laser to clean your optical drive (CD/DVD). The laser does not need cleaning.
49 of 56