Hot-Swap Mobile Rack (Optional); Connecting An External Hard Drive (Optional) - Medion P3 Revision 22 Operating Instructions Manual

PLEASE NOTE!
Data loss!
In addition, you will find the start-up files for the sys-
tem restore tool, as well as the installation files for Win-
dows® 8, on other non-rewritable partitions. These par-
titions are not visible and cannot be deleted.

9.2. Hot-swap mobile rack (optional)

An additional external hard drive can be connected to the computer via the hot-
swap mobile rack.
PLEASE NOTE!
Please bear in mind that only the above-mentioned
hot-swap mobile rack can be used.

9.3. Connecting an external hard drive (optional)

Your PC has a hard drive bay that can be used for easily and conveniently connect-
ing a MEDION HDDrive 2Go super speed
nection.
The connection is made, just like with a USB memory stick, while the operating sys-
tem is running. The hard drive will be automatically recognised as a removable data
medium and will be allocated a drive letter.
PLEASE NOTE!
This hard drive bay is only compatible with MEDI-
ON HDDrive 2Go super speed hard drives. All other
HDDrive 2Go hard drives from previous generations
cannot be used!
NOTICE!
Risk of damage!
In order to protect the connections on the data port,
the plugs are fitted with dust caps that need to be re-
moved before use. These caps should be replaced if
these connections are not being used.
MEDION HDDrive 2Go super speed hard drives are available in the following sizes:
• MEDION hard drive HDDrive 2Go super speed 6.35 cm/2.5" USB 3.0 and
• MEDION hard drive HDDrive 2Go super speed 8.89 cm/3.5" USB 3.0.
* MEDION HDDrive 2Go super speed hard drives are not included in the delivery.
*
external hard drive via the USB 3.0 con-
27 of 56