Uefi Firmware Configuration; Clear Cmos (Optional); Windows® 8 - Help And Support - Medion P3 Revision 22 Operating Instructions Manual

19.4. UEFI fi rmware confi guration
he UEFI firmware configuration (the basic hardware configuration of your system)
offers you numerous configuration options for operating your PC.
For example, you can modify the operating mode for interfaces, security features or
power supply management.
PLEASE NOTE!
Loss of data!
The PC has already been configured by the manufac-
turer to ensure optimum operation. Please only change
settings where strictly necessary and if you are familiar
with the configuration options.
19.4.1. Executing the UEFI firmware configuration
You can only run the configuration program upon system startup. If the PC has al-
ready been started, shut down Windows® and restart it.
 Before the PC reboots, press the "Del" key and hold it down until the message
"Entering Setup" appears.

19.5. Clear CMOS (optional)

PLEASE NOTE!
If, contrary to expectations, you have changed settings
that result in the PC becoming unstable, you can delete
the CMOS memory using the Clear CMOS button and
restore UEFI to its factory settings.
19.6. Windows® 8 – Help and support
Here you will find a comprehensive collection of instructions, help sections and
troubleshooting suggestions.
This help covers the entire spectrum of the Windows operating system.
It is recommended for both beginners and experts. The information is subdivided
into topics and can be printed out or bookmarked. Start as follows:
 Move the mouse pointer into the top right or bottom corner of the display,
move the mouse down and click
 Now click on Help.
 Choose the topic you are interested in.
46 of 56
Settings.