Illumination (Optional); Connecting Power Supply - Medion P3 Revision 22 Operating Instructions Manual

5.16. Illumination (optional)

Your PC comes with lighting which can display different colours and lights up in two
operating modes.
5.16.1. Select illumination mode
 Press the illumination control once in order to switch on the lighting permanent-
ly.
 Press the control again to change the operating mode to pulsing light.
 Press the control again to switch off the lighting.
5.16.2. Colour selection
 Turn the illumination control to the right or left to select the required colour.

5.17. Connecting power supply

Finally, connect the power supply for your PC and the monitor.
 Plug the power cable into the socket and connect it to your PC's mains cable
socket.
Please note the following safety advice:
WARNING!
Risk of electric shock!
Even when the mains switch is off, some components
of the device are live.

In order to disconnect the power to your PC or to
completely isolate the device from voltage sources,
remove the mains plug from the mains socket.
• The socket must be close to the PC and easy to access.
• Only operate the PC on earthed socket outlets of the household electricity net-
work.
• Only use the mains connection cable supplied.
• For extra safety, we recommend using an overvoltage protection device to pre-
vent your PC from sustaining damage as a result of power surges or lightning
strikes.
• The standard PC mains adapter has an on/off switch. This can be used to turn the
PC on or off. When the switch is at OFF (0), no power is being consumed.
First read the next chapter for some helpful tips on initial operation.
Do not start up your PC yet!
19 of 56