Medion PC Manual
  1. Manuals
  2. Brands
  3. Medion Manuals
  4. Desktop
  5. PC
  6. Manual
Medion PC Manual

Medion PC Manual

Hide thumbs Also See for PC:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Instruction Manual, Manual
N
OTES ON THIS MANUAL
Keep these instructions with your computer at all times. The
proper set up, use and care can help extend the life of your com-
puter. In the event that you transfer ownership of this computer,
please provide these instructions to the new owner.
This manual is divided into sections to help you locate the infor-
mation you require. Along with the Table of Contents at the be-
ginning of this manual, an Index has been provided to help you
find topical information.
If you want to start up your PC immediately, please read the
chapters Operational Safety (page 3) and Setting up and Get-
ting Started (page 8).
We strongly recommend you read this entire manual to ensure
the proper set-up and operation of your PC.
Many application programs incorporate extensive help functions.
As a general rule, you can access help functions by pressing F1 on
the keyboard. These help functions will be available to you while
®
you are using the Microsoft Windows
operating system or the
respective application program.
We strongly recommend that you read the Online Manual for
your PC, which can be found in the Start Menu.
Information about your PC
This interactive manual is designed to provide additional informa-
tion about your PC as well as useful links accessible via the World
Wide Web.
Windows invites you to a tour (note on the task bar) to familiarize
yourself with the operating system. We listed further useful
sources of information starting on page 59

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PC and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Medion PC

Summary of Contents for Medion PC

  • Page 1 Information about your PC This interactive manual is designed to provide additional informa- tion about your PC as well as useful links accessible via the World Wide Web. Windows invites you to a tour (note on the task bar) to familiarize yourself with the operating system.
  • Page 2 (i.e. Microsoft ........Place and date of Purchase ........You will find the PC serial number on the Service Hotline card. The serial number also appears on the rear of the PC. UALITY Medion has selected the components in this computer for their high level of functionality, ease of use, safety and reliability.

  • Page 3: Table Of Contents

    Connecting a recording source / video inlet ....22 LAN connection ............23 Connecting serial devices......... 23 Connecting the PC to a television (TV-out) ....24 Antenna connection for TV / radio receiver ....24 Modem connection..........24 Connecting the power supply........25...
  • Page 4 Performance characteristics ........45 Current image playback frequencies ......45 Connecting the PC to a television ......46 How to connect the PC to a television: ....47 The sound card............48 USB port ..............48 IEEE 1394 (Fire Wire) ..........49 Application options for IEEE1394 ......
  • Page 5 This is how to install your software: ......63 Software uninstallation.......... 64 Windows activation ..........65 Product activation on your PC ........ 65 BIOS setup ............66 Execution of the BIOS setup ........66 Customer service & self help ........67 Data and system security...........
  • Page 6 Troubleshooting ............. 77 Localise the cause ..........77 Errors and possible causes ........78 Additional support ..........79 Driver support............79 Transporting the PC ..........80 Cleaning and care........... 80 Recycling and disposal..........81 Battery treatment........... 81 Upgrades and repairs ..........83 Notes for service engineers........

  • Page 7: Safety

    Chapter 1 Safety Subject Page Operational safety ........3 Data security ..........4...

  • Page 9: Operational Safety

    These openings are for ventilation purposes. Covering these vents may lead to overheating. Switch off your PC immediately or do not switch it on at all and contact customer service … • … if the power cord or the connectors attached to it are burnt or damaged.

  • Page 10: Data Security

    ATA SECURITY Attention! Every time you update your data make back-up copies on an external storage medium. The supplier does not assume liability for data loss or damage to data storage units, and no claims can be accepted for damages resulting from the loss of data or consequential losses.

  • Page 11: Setting Up & Getting Started

    Chapter 2 Setting up & Getting started Subject Page Included with your PC .......7 Setting up ..........8 Connecting ..........12 Getting started ........26...

  • Page 13: Included With Your Pc

    Please check that the contents listed below are supplied with your package and notify us within 14 days of purchase if this is not the case. You MUST provide your PC’s serial number when con- tacting a customer service representative.

  • Page 14: Setting Up

    Detailed below are additional guidelines on setting up your PC. UP LOCATION • Keep your PC and all units connected to it away from mois- ture, dust, heat and direct sunlight. Failure to observe these instructions can lead to malfunctions or damage to the •...

  • Page 15: Ergonomics

    RGONOMICS Note: Ensure that the monitor is set up in such a way that reflections, glare and light/darkness con- trast are avoided. You should not position the monitor in close proximity to a win- dow, because this is the brightest area of the room because of daylight.
  • Page 16 Sitting in one position for long periods can be uncomfortable. To minimize the potential for physical discomfort or injury, it’s impor- tant that you maintain proper posture. Overall: Change your position frequently and take regular breaks to avoid fatigue. Back: While sitting at your work surface, make sure your back is supported by the chair’s backrest in erect position or angled slightly backwards.
  • Page 17 • Hand rest: 2” – 4” • Top line of screen at eye level or slightly below • Viewing distance: 20” – 27.5” • Legroom (vertical): minimum 25.5” • Legroom (horizontal): minimum 23.6” & &...

  • Page 18: Connecting

    • To avoid damage to your PC, connect your peripherals (e.g., keyboard, mouse and monitor) whilst your PC is powered off. Some devices can be connected whilst your PC is in use. These devices usually have a USB or IEEE 1394 connector.

  • Page 19: Front Connectors

    RONT CONNECTORS Here is how you can access the card reader and some further connectors on the front of your PC casing. Press on the front screen, so that it DVD-RW DVD-RW folds open.

  • Page 20: Connecting The Monitor

    You can change the screen resolution and configuration of your monitor as follows (See also your monitor's User Manual): 1. Once you have powered on the PC, press the F8 key to se- lect Safe Mode. If you don’t hit the F8 key on time, you won‘t see the start menu which gives you the option to run in Safe Mode.

  • Page 21: Installing Wireless Keyboard & Mouse

    2. Replace the battery compartment cover (1) on the bottom of mouse 3. The mouse is charged by your PC using the supplied USB- cable. Connect the cable end with the small connector on the front side of the mouse and the other cable end with your PC, while the PC is switched on.

  • Page 22: Inserting Batteries In Keyboard

    NSERTING BATTERIES IN KEYBOARD The keyboard requires two alkaline batteries (AA). 1= Cover 2= Battery compartment 3= Channel setting button (Diagram the same) 1. Remove the battery compartment cover (1) on the bottom of the keyboard by pushing it in the direction of the arrow. 2.

  • Page 23: Setting The Frequency Channel Or Id

    ETTING THE FREQUENCY CHANNEL OR Important: Do not carry out the following installa- tion steps until you have put the PC into operation as described on the following pages. For a good wireless radio connection, you must ensure the fre- quency channel and/or ID of the keyboard and mouse is the same as that of the receiver.

  • Page 24: Connecting The Receiver

    1. Attach the USB receiver for the mouse and the keyboard to any free USB connection. It is recommended to use a con- nection at the back of the PC because of the visual appear- ance. 2. The distance between the reception station and the trans- mitter (keyboard and mouse) should not exceed 20 cm, in order to receive optimum wireless conditions.

  • Page 25: Connecting A Usb Keyboard/Mouse

    P on the rear of your PC. 2. Hand-tighten the screws of the printer cable. If you wish to use a scanner, which also connects to the PC via the parallel interface, follow the instructions above. With the PC parallel port in use, the printer can be connected directly to the scanner.

  • Page 26: Usb/Ieee 1394

    Read the manual for your peripheral device first. The voltage outputs of your PC for IEEE 1394 as well as for USB are protected by a fuse (limited power source according to EN60950). This ensures that a malfunction of the PC will not damage the peripheral devices connected to the respective jacks.

  • Page 27: Connecting Speakers/Audio Output

    ONNECTING SPEAKERS AUDIO OUTPUT Diagram reference: H1 Here you can connect your headphones, active speakers or audio connection cables for recording. Please refer to the user's guide of your stereo installation for information about which con- nector you should use (usually Line In or Aux). 1.

  • Page 28: Connecting A Microphone

    VIDEO INLET Diagram reference: K, L Depending on the configuration you can connect an external video source to your PC using an S-Video or composite (cinch) cable. These connections enable you to record and, if necessary, edit video data. 1. Connect the plug of the cord to the jack (position K for cinch and L for S-Video).

  • Page 29: Lan Connection

    CONNECTION Diagram reference: Q Your PC is equipped with a network connection, in order to pre- pare it for network operation. The network cable usually has tow RJ45 plugs so that it is unim- portant which plug is connected to which jack.

  • Page 30: Connecting The Pc To A Television (Tv-Out)

    PC for Internet excess and fax operation, according to the equipment. The modem cable has an RJ11 plug, which is plugged into the modem of your PC, and a TAE plug, which fits an N- coded, analogue telephone socket.

  • Page 31: Connecting The Power Supply

    If in doubt, ask an electrician. • The power supply unit has an On/Off switch (X2) that can be used to power off the PC. When the switch is Off (0) no power is being consumed. DO NOT Start Your PC Yet! First, read the following section to find out what you need to know in order to get started.

  • Page 32: Getting Started

    OWER ON 1. Power on the monitor and your peripherals. WITCH Diagram reference: X2 2. Power on your PC by pressing the Switch to position [1]. (You will interrupt the current entry by pressing the switch to position 0.) OFF SWITCH Diagram reference: N1 3.

  • Page 33: Step 2: Starting Initial Setup

    2: S TARTING INITIAL SETUP The PC starts and now goes through a number of phases: Note: Ensure that there is no bootable CD (e.g. the Recovery-CD) in the CD-ROM drive. Such disks will prevent the operating system from loading directly off the hard drive.

  • Page 34: Step 3: Finalizing

    PC as well as valuable hints and additional assistance. Switching off Click on this button with the left mouse key to switch off the PC. Task bar Here you receive information and status reports about the operat-...
  • Page 35 “Icons” on the “Desktop” Icons are program links used to start the respective programs. A double click (press the left mouse key quickly twice) on the symbol starts the application. The Desktop includes almost the complete screen and is the filing area for those entries or other links you would like to access quickly.

  • Page 37: Operation

    Chapter 3 Operation Subject Page Multimedia at the press of a button .... 33 The mouse ..........34 The keyboard ........35 The hard drive ........38 The optical drive ........40 The card reader ........44 The graphics card ........45 The sound card ........

  • Page 39: Multimedia At The Press Of A Button

    INEMA ON You will start the Linux Power Cinema application with the multi- media button (N2) when the PC is switched off. The user inter- face, which you will be able to operate with the aid of the remote of the multimedia keys, will appear after a short time.

  • Page 40: The Mouse

    The Mouse The mouse has beside the two key a wheel that can be used as: To scroll through a document or internet pages. If the mouse course moves jerkily on the screen, try a different surface (mouse pad). Glass and metallic surfaces might cause problems.

  • Page 41: The Keyboard

    The Keyboard This section contains useful information on using the keyboard. All diagrams are schematic. On the base of the keyboard are two folding feet that let you ad- just the angle of the keyboard. Pull them forward to adjust the angle of the inclination.

  • Page 42: Multimedia Functions

    ULTIMEDIA FUNCTIONS Some keyboards are provided with multimedia keys. These keys have the following functions: Icon Function Standby Mode Depending on the settings in the computer’s BIOS Setup or operating system the computer switches to standby mode. Back Switches to the previous web page/folder. Forward Switches to the next web page/folder.
  • Page 43 Play/Pause Use this key to start or pause, for a short time, the playback of a track/title just as you would with a normal CD player. Previous Track Use this key to skip backwards to the previous track/title in the active player. Next Track Use this key to skip forward to the next track/title in the active player.

  • Page 44: The Hard Drive

    The hard drive contains the operating system of the computer, other application programs and backup files. These programs and files are pre-installed on your PC, so you may note that some of the space on your hard drive is already taken.

  • Page 45: Important Directories

    E:\Recover Here the backup files are located enabling you to recover the factory setting (see page 73). ONNECTING AN EXTERNAL HARD DRIVE Your PC has a hard disk bay, which will enable you to connect the external MEDION HDDrive 2go hard drive simply and without complications.

  • Page 46: The Optical Drive

    The optical drive OADING A DISC Attention: Do not place protective foils or other stickers on your CD’s. To avoid damage to your drive, do not use deformed of damaged CD’s. Attention: Do not use scratched or dirty disks, discs with pieces broken off or disks of poor quality.

  • Page 47: Playing Back And Retrieving Data From Discs

    HE OPTICAL DRIVE AS BOOT DRIVE The optical drives can be used for booting the operating system. If the PC does not boot, it is possible that autostart is turned off in the BIOS or the CD is not bootable.

  • Page 48: Regional Playback Information For Dvd

    Attention: The decoding software included with your PC may be changed for regional DVD decoding up to five times, after which the drive will only play DVD movies for the region setting last entered. Changing the region code after that will require factory reset- ting which is not covered by warranty.

  • Page 49: Subjects Concerning The Cd/Dvd-Rewriter

    CD/DVD-R UBJECTS CONCERNING THE EWRITER You receive information on the so-called blank discs. These media, requiring a CD rewriter (burner) to produce CDs are called CD recordable (CD-R) or CD rewritable (CD-RW). Recordable/Rewriteable Discs Normal Discs are pressed from a digital, glass master and then sealed.

  • Page 50: The Card Reader

    The card reader You can handle different memory card types. The following table refers to the use of the Card Reader: Slot Card type Contacts Memory Stick point to bottom Memory Stick Pro SD (Secure Digital) MMC (MultiMediaCard) CF (Compact Flash) point to front IBM®...

  • Page 51: The Graphics Card

    The graphics card Your computer is fitted with a high performance graphics card, one of the most technologically advanced and best-equipped VGA cards available. ERFORMANCE CHARACTERISTICS • High Performance Acceleration • Interactive Direct3D Acceleration • Video Acceleration for DirectDraw/DirectVideo, MPEG-1, ®...

  • Page 52: Connecting The Pc To A Television

    ONNECTING THE TO A TELEVISION With the help of the video output connectors (TV-out) at the back of your PC, you can transfer the image from your PC to the televi- sion set. YU(Pb)V(Pr) (Component) Composite SCART (RGB) (Cinch) S-Video...

  • Page 53: How To Connect The Pc To A Television

    PC (reference V1/V2/V3/V4) and to your TV set. 3. Switch on the television to see the PC image on your TV set. 4. Start up the PC and wait for Windows to fully load.

  • Page 54: The Sound Card

    You can make the necessary settings for configuring the loud- speakers, etc. by means of the software supplied with the PC. You open the configuration program, to make user-defined set- tings, by means of the symbol on the right in the task strip.

  • Page 55: Ieee 1394 (Fire Wire)

    • The voltage output of the 6-pole IEEE 1394 jack is protected by a fuse (limited power source according to EN60950). Note: The IEEE 1394 ports located at the front of you PC can only be used separately. A simultaneous use is not possible.

  • Page 56: The Radio/Tv Tuner Card

    The radio/TV tuner card The radio/TV tuner card is an optional feature. Possibly your PC is equipped with a so-called Combo board. You recognise this at the modem or ISDN jack on the outside in addition to the TV/Radio antenna sockets. Then both devices are located on one Combo board requiring a special Combo slot.

  • Page 57: Button Layout

    UTTON LAYOUT On / Off View television programs. Record television programs. Open photo archive. Open music archive. Open DVD menu. View video recordings. EPG function (Electronic Program Guide) Start video text appli- cation. Note: The functions described here are standard functions.
  • Page 58 Special function But- ton (e.g.: Selection of the audio track) Special function But- ton (e.g.: Camera selection) Special function But- ton (e.g.: Chapter selection) Special function But- ton (e.g.: Subtitle selection) You select the re- quired function with these navigation Buttons.
  • Page 59 Reverts to the point selected previously. Application-related information function. The Select button lights up if a button on the remote is op- erated. It serves to select certain func- tions, i.e. for the changing of the transmission / recep- tion channel of the remote.

  • Page 60: Changing The Transmission/Reception Channels

    HANGING THE TRANSMISSION RECEPTION CHANNELS If several computers with remote controls are set up in close proximity of each other (approx. 10 metres), this can lead to disturbance. This can be remedied by choosing different channels. Only reset the remote control in case of disturbances. Proceed as follows: 1.

  • Page 61: The Network

    You will find further information about networking in the Help section within the Start menu. HAT IS A NETWORK A network means connecting your PC to another or several other PCs. Users can transfer information and data between computers and share resources such as printers, modems and hard disk drives.

  • Page 62: Wireless Lan

    IRELESS This function allows you to create a wireless network link with a partner. AFETY NOTES Attention: Don’t use this feature in environments where highly sensitive devices are placed such as in hospitals etc.. To avoid any interference disable this option in your device manager.

  • Page 63: Troubleshooting Within The Network

    The transmission speed (max. 54 Mbps) can vary according to distance and other factors. If i.e. the other devices support the 802.11b standard the transmission speed can be max. 11 Mbps. Search for “wireless networking” in Windows Help and Support for more information.

  • Page 64: Modem / Isdn

    Modem This chapter is intended for systems equipped with a modem or jack. The built-in modem is able to receive data according to the ITU standard for V.90 transmissions with up 56 Kbit/s. Since the power output of modems is restricted due to the regula- tions of some telecommunication providers, the possible maxi- mum download speed can be restricted.

  • Page 65: Software

    Software This section deals with software, differentiating between BIOS, application programs and operating systems. ETTING TO KNOW INDOWS Windows XP offers different options to understand its operation. We will mention only a few of those options here: – INDOWS HOME EDITION FIRST STEPS This manual will provide general information about the operating system.

  • Page 66: Microsoft Interactive Training - Step By Step

    • operating the email program • ... and much more! Use this program to better understand your PC and to operate it optimally. It also is an additional source of information for recog- nizing and eradicating potential problems. You start the program like this: 1.

  • Page 67: Writing Cds/Dvds

    /DVD RITING We describe the writing process with the software Nero – Burn- ing ROM. Please follow this instruction only if you use this soft- ware. Note: A writing process should always take place on its own. Please terminate all running programs (fax reception, screen savers, Power-Management etc.).

  • Page 68: Installation Of Software

    NSTALLATION OF SOFTWARE Note: If your operating system is configured that the installation procedure accepts only signed drivers (de- fault) and software this information screen will appear: Although the software lacks the digital signature it may work properly. Click on “Tell me why this testing is im- portant”...

  • Page 69: This Is How To Install Your Software

    HIS IS HOW TO INSTALL YOUR SOFTWARE Please follow the instruction of the software vendor. We will de- scribe a typical installation. Once you insert a CD, the installation menu is started automatically. Note: If the automatic start does not work, it is likely that the so-called Autorun function has been deacti- vated.

  • Page 70: Software Uninstallation

    OFTWARE UNINSTALLATION In order to remove installed software from your PC, follow the next steps: 1. Click on 2. Click on 3. Then select the following program: 4. Select the respective program, start the uninstallation and follow the instructions on the screen.

  • Page 71: Windows Activation

    Your copy of Windows XP has already been activated for your PC. Product activation is needed if some components of your PC have been replaced or you use a non-authorized BIOS. If necessary you can activate Windows XP as often as requested.

  • Page 72: Bios Setup

    You can only execute the configuration program when starting the system. If the PC has already been started exit Windows® and reboot. Prior to rebooting the PC press the key »Del« and keep it pressed until the message »Entering Setup« appears.

  • Page 73: Customer Service & Self Help

    Chapter 4 Customer service & self help Subject Page Data and system security ......69 System recovery ........70 FAQ – Frequently Asked Questions .... 75 Troubleshooting ........77 Driver support ........79 Transport ..........80 Cleaning and care ........80 Recycling and disposal ......

  • Page 75: Data And System Security

    Data and system security The programs described below are part of your Windows operat- ing system. You will additional information on these programs in the Windows Help file. ATA SECURITY Back up data regularly on external media such as a CD-R or CD- RW.

  • Page 76: System Recovery

    In the next paragraph read your options for a repair of an incorrect installation. ORRECTION Windowsxp includes various functions ensuring that the PC as well as the installed applications and devices work correctly. These functions assist you in solving the problems which might occur by adding, deleting or replacing files required for the func- tionality of the operating system, the applications and devices.

  • Page 77: Windows ® Update

    ® INDOWS PDATE Windows Update is the online updating of Windows. Use Win- dows Update to download elements such as security updates, im- portant updates, the newest help files, drivers and Internet prod- ucts from the Internet. The website is regularly augmented by new content, so that you can download the newest updates and error corrections at any time, to protect the Notebook and guarantee its functioning.

  • Page 78: Windows Update Information For Data Security

    The information collected will only be used during the time that you are visiting the website. It will also not be stored. The update can only be executed via the Internet. Ensure that you are on-line with your PC when downloading the updates.

  • Page 79: Restoring The Factory Settings

    ESTORING THE FACTORY SETTINGS Should your system not function correctly, you have the opportu- nity to recover the original set-up. Use the included application/support disk to do this. This recovery method offers you several possibilities for system recovery: System recovery from hard disk •...

  • Page 80: Carrying Out A Restore

    ROM for restoration purposes. This disk does not re- store the original set-up. You can use it when an in- dividual set up is required. 3. Select the option Start from CD-ROM. 4. Follow the on-screen instructions. 5. The PC restarts to its original factory settings.

  • Page 81: Faq - Frequently Asked Questions

    FAQ – Frequently Asked Questions When do I have to activate Windows? Your software has been preactivated in the factory. An activation will only be required, if ..several components are replaced by others..you install a new motherboard..
  • Page 82 Do I still have to install the enclosed CDs/DVDs? No. Basically all programs are already preinstalled. The disks are only intended as backup copies. When is the recovery of the factory setting recom- mended? This method should be chosen as the last resort. Read chapter “System recovery”...

  • Page 83: Customer Service

    • Check power points, power cable and all power switches. • Switch off the PC and check all cable connections. Check the connections to peripherals. Do not exchange cables, even though they may look similar. The polarity in those ca- bles may be different.

  • Page 84: Errors And Possible Causes

    The PC does not start up. • If all cable connections are correct, then try to reset the power supply of the PC. Set the power switch at the rear of the PC to position 0 (OFF). Now press down the main switch at the front of the PC for 10 seconds.

  • Page 85: Additional Support

    (e.g., programs or hardware) that were not tested at the time of your PC’s manufacture. Driver up- dates and the latest information on your product are available on the Internet.

  • Page 86: Transporting The Pc

    • Before cleaning, always remove the power plug and all connecting cables. • Clean the PC with a damp, lint-free cloth. Do not use any solvents, corrosive or gaseous cleaning agents. • DO NOT use CD-ROM cleaning disks or similar prod- ucts that clean the lens of the laser to clean your CD- ROM/CDR-W/DVD-drive.

  • Page 87: Recycling And Disposal

    ECYCLING AND DISPOSAL This PC and its packaging was produced mostly from materials which can be disposed of in an environmentally friendly manner and be professionally recycled. After its use the computer will be taken back and recycled or use will be made of its useful material, if it is returned in a condition corresponding to its intended use.
  • Page 88 • DO NOT reverse the positive (+) and negative (-) termi- nals to avoid short-circuit. • Do NOT MIX used and new or different types of batteries together. Your equipment may not operate properly. In addition, the battery exhausted first may be excessively drained (over- discharged).

  • Page 89: Upgrades And Repairs

    • Laser devices of Laser Class 1 to Laser Class 3b may be used in the PC. Where the PC housing remains closed, the device meets the requirements of Laser Class 1. By open- ing the PC housing you will gain access to laser devices of up to Laser Class 3b. &...
  • Page 90 • The CD-ROM-/CDRW-/DVD-drives installed contain no user- serviceable parts. When removing and/or opening laser devices, the following guide- lines must be observed: • Only the manufacturer should perform repairs to the CD- ROM-/CDRW-/DVD-drives. • DO NOT look into the laser beam, even while wearing optical protection.

  • Page 91: Appendix

    Chapter 5 Appendix Subject Page PowerCinema Linux license agreement ..87 Standards ..........88 Index............94...

  • Page 93: Powercinema Linux License Agreement

    PowerCinema Linux license agreement ICENSE DISCLAIMER This product includes certain copyrighted third-party software com- ponents licensed under the terms of the GNU General Public License, PSF LICENSE AGREEMENT FOR PYTHON 2.3, and other similar license agreements offering free distribution of these software components offered by organizations such as Free Software Foundation, Python Software Foundation, the X.Org Foundation, etc.

  • Page 94: Standards

    Standards This PC meets the requirements of the following standards: LECTROMAGNETIC COMPATIBILITY This PC meets the following requirements for standards of elec- tromagnetic compatibility and electrical safety: EN 55022 Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement.

  • Page 95: Ergonomics

    Acoustics. Measurement of airborne noise (ISO 9296) emitted by information technology and telecommunications equipment. This PC fulfils the requirements of noise emissions according to ISO 7779 with following values: Operating Mode Max. Sound power level L (B/A) (declared according to...

  • Page 96: Information About The Regulatory Compliance Of The Modem

    NFORMATION ABOUT THE REGULATORY COMPLIANCE OF THE MODEM This PC, if equipped with a modem, has been tested according and complies with the European regulatory guidelines for radio equipment and telecommunication installations (R&TTE 1999/5/EG). The modem meets the requirements of TBR21 (01/1998) and EG201120/V1.1.1/01/98 regarding connection with an analogue...

  • Page 97: Fcc Compliance Statement

    COMPLIANCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency en- ergy and, if not installed and used in accordance with the instruc- tions, may cause harmful interference to radio communications.

  • Page 98: Warranty

    Warranty The receipt serves as proof of first purchase and should be kept in a safe place. Your legal rights are not limited by these warranty conditions. It is required should you need to make use of the guarantee. We guarantee that this equipment is in perfect working order. Upon production of the receipt, the remaining period of guarantee shall pass on from the original parts to the respective replacement parts.

  • Page 99: Liability Limitations

    IABILITY LIMITATIONS The contents of this manual are subject to unannounced changes caused by technical progress. Manufacturer and sales shall not be responsible for any damages which have been caused as a result of omissions or errors in the information provided in this manual. Under no circumstances shall we be liable for any of the following: 1.

  • Page 100: Index

    Index Speakers/audio output..21 Television ......24 USB devices ..... 20 Video inlet ....... 22 Ambient temperature ..... 8 Customer service ....77 Audience .......ii Autorun ......63 Data and system security ..69 Data security....4, 69 Cabling .......12 Directories ......39 Card reader ......44 Disc drive ......
  • Page 101 MMC ........44 Modem / ISDN..... 58 Mouse ........ 34 Graphics card ......45 Inserting batteries .... 15 MultiMediaCard ....44 Hard drive ......38 HD ....See Hard drive Nero ........61 Hotline........79 Network ......55 LAN access point....56 Troubleshooting ....57 What is a network? ...
  • Page 102 Surround sound ....21 System recovery....70 Radio/TV tuner card....50 Remote control ....50 Restore .......74 Transporting ....... 80 Troubleshooting ....70, 77 SD ........44 Secure Digital ......44 Serial number ......ii USB port......48 Service engineers ....83 USB/IEEE 1394....20 Set-up location ..... 8 SmartMedia ......44 Software uninstallation..64 Sound card......48...

Table of Contents