Table of Contents
Advertisement
15. USB connection (optional)
PLEASE NOTE!
Devices connected directly to the USB BUS may not
draw more than 500 mA. The power output is protected
by a fuse (limited power source as per EN 60950). If you
want to connect devices that require more power, you
need to connect them to two USB ports using a Y cable.
The USB 3.0 ports are fully backwards compatible with USB 2.0 and 1.1.
Where possible, always connect your USB devices to the same port that they
were originally installed on. Otherwise you will be assigned a new ID and the
drivers will need to be reinstalled.
16. TV tuner card (optional)
In order to receive TV signals via a TV tuner card, it is necessary to connect an ana-
logue antenna, a DVB-T antenna or a digital satellite* system.
PLEASE NOTE!
Risk of a lightning strike!
Disconnect the aerial when the device is not being
used, especially during thunderstorms. This will protect
your device from possible lightning strikes.
17. Network operation
17.1. Wireless LAN (Wi-Fi)
Your PC is equipped with WLAN. The components (module, antenna) have already
been integrated into your PC and activated. You can disable this function using the
Windows® device manager if required.
Wireless LAN enables you to establish a network connection to a corresponding re-
mote station.
*
The optional SAT socket on your PC is a DVB-S2 socket for high-resolution satellite TV reception. This
only enables playback of unlocked and unencrypted programmes.
34 of 56
Hide quick links:
Advertisement
Table of Contents
