Administrator Account Setup - KGuard Security SHA14 User Manual

4
To save, click Apply at the bottom of the screen.
« TIP »
• To revert to default settings, click Default at the bottom of the screen.
• To cancel any modifications and retain the existing settings, click Refresh at the bottom of the screen.

Administrator Account Setup

Use the User menu to change the login password and grant user access rights to DVR settings. Only the administrator
can authorize and grant access rights to users.
There is only one administrator account and six user accounts. By default, the administrator account's user name is
"admin" and the password is empty.
To change the administrator password, do the following:
1
On the Main Menu, click Remote Setting.
2
On the left panel, click System > User. The User screen appears.
3
Select the administrator account, named "admin" by default, from the table.
4
Enable Password. This makes the User Name, Password and Confirm fields available for entry.
5
Enter the desired password on Password and Confirm.
Note:
• The password must be 6 characters in length.
• The entered text on Password and Confirm must match.
« TIP »
You can modify the administrator user name if desired. To do so, enter the desired name on the User Name field.
6
To save, click Apply at the bottom of the screen.
« TIP »
• To revert to default settings, click Default at the bottom of the screen.
• To cancel any modifications and retain the existing settings, click Refresh at the bottom of the screen.
Chapter 5: KGuard Web Client
DVR User's Manual
71