Update System Firmware; Load Default Settings - KGuard Security SHA14 User Manual

Update System Firmware

Use this feature to update the firmware with the latest version.
1
Open a web browser and visit KGuard Security web site (www.kguardsecurity.com).
2
Check for available updates and download the firmware update file named "dvrupgrade".
3
Save the "dvrupgrade" file in a USB flash drive.
4
Insert the USB flash drive into a USB connector on the front panel or the rear panel of the DVR.
5
In preview mode, right-click on the mouse to display the Pop-up menu.
6
Select Main Menu > SYSTEM > MAINTAIN.
7
Click Update.
8
Follow the instructions on the screen to complete the update.

Load Default Settings

Use this feature to restore the factory default settings of the DVR.
1
In preview mode, right-click on the mouse to display the Pop-up menu.
2
Select Main Menu > SYSTEM > MAINTAIN.
3
Click Load Default.
4
Check the check box of the settings that you want to restore.
« TIP »
• To restore all settings, click Select All.
• To deselect the checked boxes, click Select None.
• To cancel, click Cancel.
5
When you are done, click Apply.
6
A warning message appears, click OK to confirm.
7
When data saving is complete, click OK.
Chapter 4: Using the DVR
DVR User's Manual
53