4.5.2 User and Password Settings
The PASSWORD menu allows you to change the password and authorize users and set the access rights in using the
DVR. There is one administrator account and 6 user accounts. By default, the administrator account's user name is
"admin" and the password is empty. Only the administrator account is enabled by default. To grant other user to
access, see
"Authorizing Other Users" on page
Changing the Password
To protect your account, modify your password.
1
In preview mode, right-click on the mouse to display the Pop-up menu.
2
Select Main Menu > SYSTEM > PASSWORD.
3
Click the check box of the account to change the password. A √ icon appears.
4
Click Edit.
5
If you want to modify the user name, enter desired name in User Name.
6
Select Enable in Password Status.
7
Click the Password box to enter the password (see
virtual keyboard).
Note:
The password must be 6 characters in length.
8
In Confirm, enter the password again.
9
After all settings are complete, click Apply.
48.
"3.3.2 Virtual Keyboard" on page 19
Chapter 4: Using the DVR
for details on using the
DVR User's Manual
47