Link Start Mode Selection - Mitsubishi FR - S500 Instruction Manual

n8 (Pr. 338) "operation
Operation
command write"
location
n9 (Pr. 339) "speed
selection
command write"
RH, RM, Remote setting
RL, REX (RH, RM, RL)
selection
15-speed selection (REX)
function
MRS
PU operation interlock
selection
(MRS)
function
[Explanation of table]
External : Operation is valid only from external terminal signal.
Computer : Operation is valid only from sequence program.
Either : Operation is valid from either of external terminal and computer.
— : Operation is invalid from either of external terminal and computer.
CAUTION
When Pr. 79 "operation mode selection" is set to "7" (PU operation interlock function),
only the external terminal is made valid independently of the n8 and n9 settings
because the MRS terminal is shared.
2
.14.3

Link start mode selection

You can choose the operation mode established at power-on or at power
restoration after instantaneous power failure.
Set "1" in n10 to select the computer link operation mode.
After a link start, parameter write is enabled with a program.
Parameter Name
Link start mode
n10 (340)
selection
The parameter number in parentheses is the one for use of the parameter unit (FR-PU04).
0:
Computer Computer
0:
Computer
Computer
—
External
Factory Setting
Setting Range
0 0, 1 Setting is enabled when Pr. 30 = "1"
131
0: 1:
External
1: 0:
External Computer
External Computer
— —
External External
Remarks
1:
External
Remarks
1:
External
External
Pr. 59 =
"1", "2"
—
External Pr. 79 = "7"
2