Display Function Parameters; Monitor Display - Mitsubishi FR - S500 Instruction Manual

2

.6 Display Function Parameters

2
.6.1

Monitor display

You can choose the display of the operation panel "monitor/frequency setting
screen".
For the Pr. 54 function, the Japanese version has the FM terminal feature, and
the NA and EC versions have the AM terminal feature.
Parameter Name
Operation panel
52 display data
selection
FM (AM) terminal
54
function selection
POINT
You can also use the
manual (basic) for the operation procedure.)
The pulse train output terminal FM (analog voltage output terminal AM) is
available for signal output. (Make selection using the Pr. 54 "FM (AM) terminal
function selection" value.)
<Setting>
Signal Type Unit
Output
frequency
Output current
When "100" is set in Pr. 52, the monitor value changes depending on whether the
inverter is during stop or running.
Output frequency
REMARKS
During an error, its definition appears.
During reset, the values displayed are the same as during a stop.
For selection of the parameter unit (FR-PU04) monitor display, refer to the
communication parameter n16 "PU main display screen data selection". (Page 134)
CAUTION
The unit displayed on the operation panel is only A and other units are not displayed.
Related parameters
Speed display Pr. 37 "speed display" (refer to page 73)
Adjustment of FM (AM) level meter full-scale value
Monitoring reference
Factory
Setting
0
0
key to change the display. (Refer to the instruction
SET
Parameter Setting
Pr. 52
Operation panel
LED
Hz 0/100
A 1
0
During running/stop
Output frequency
Pr. 55 "frequency monitoring reference", Pr. 56 "current monitoring
reference" (refer to page 84)
Setting
Range
0, 1,
100
Setting is enabled when Pr. 30 = "1"
0, 1
Pr. 54
FM (AM)
terminal
0
1
Pr. 52
During stop
Set frequency
Calibration parameter C1 "FM (AM)
terminal calibration" (refer to page 111)
82
Remarks
Full-Scale Value of FM
(AM) Level Meter
Pr. 55 "frequency monitoring
reference"
Pr. 56 "current monitoring
reference"
100
During running
Output frequency