Setting Method - ISHIDA IGX Series Operation Manual

4.1 Setting Method

4.1 SETTING METHOD
W hen the power supply is turned OFF,
1
press the ON/OFF key to turn ON the power, then immediately press the COLUMN key
while all display segments are lit. Then, the set value number of Setting No. 1 appears.
Change the set value by pressing the ZERO (+) key or TARE (-) key.
2
When not changing the setting value, just press the SET key.
or
or
page 24
IGX Series
IGX Series
IGX Series
IGX/IGB Series Operation Manual No. 0203A
IGB Series
IGB Series
IGB Series