ISHIDA IGX Series Operation Manual page 14

Setting the Tare Weight
Press the SET key to display the tare weight for the selected PLU.
4
5 Move the flashing digit to the desired position by pressing the COLUMN key.
6 Increase or decrease the numeric value by pressing the ZERO (+) or TARE (-) key. Then,
press the COLUMN key to determine the value. Repeat this step until completing the entry.
[Example] Tare weight 250g
or
or
IGX/IGB Series Operation Manual No. 0203A
IGX Series
IGX Series
IGX Series
2.1 Presetting the Values
IGB Series
IGB Series
IGB Series
page 11
2