3.1 Weighing Non-PLUs
3.1 WEIGHING NON-PLUs
When the power is turned OFF,
1
press the ON/OFF key to turn on the power, the self-diagnosis display will start, then stop
at the initial display with "ZERO" indicator lit.
NOTE
If "ZERO" indicator is not lit, press the ZERO key to initialize the display.
2
Place a tare on the weigh platter, and press the TARE key to subtract the weight.
The "NET" indicator will be lit.
[Example] Tare weight: 180g
3
Place an item on the weigh platter.
The display will show the net weight.
[Example] Net weight: 2,280g
page 18
IGX Series
IGX Series
IGX Series
IGX Series
IGX/IGB Series Operation Manual No. 0203A
IGB Series
IGB Series
IGB Series
IGB Series