2.1 Presetting the Values
Setting the Upper Limit Value
Press the SET key to determine the tare weight and move to the display for setting the upper
7
limit value.
Move the flashing digit to the desired position by pressing the COLUMN key.
Increase or decrease the numeric value by pressing the ZERO (+) or TARE (-) key. Then,
8
press the COLUMN key to determine the value. Repeat this step until completing the entry.
[Example] Upper limit value 1000g
or
or
Setting the Lower Limit Value
Press the SET key to determine the upper limit value and move to the display for setting the
9
lower limit value.
Move the flashing digit to the desired position by pressing the COLUMN key.
NOTE
If the lower limit value has already been preset, only a value equal to or larger than
this limit value can be set.
page 12
IGX Series
IGX Series
IGX Series
IGX/IGB Series Operation Manual No. 0203A
IGB Series
IGB Series
IGB Series