Place the item on the weigh platter.
4
The display will show the net weight.
[Example] Net weight 5,970g
NOTE
When the net weight exceeded the programmed upper weight limit, the "OVER"
indicator will light up.
When the net weight did not reach the programmed lower weight limit, the
"UNDER" indicator will light up.
When the net weight is between the upper and lower weight limits, the "ACCEPT"
indicator will light up.
5
After determining the PLU item weight, remove it from the weigh platter.
When weighing the same PLU item again, repeat steps 4 and 5 above.
6
NOTE
When weighing a different PLU item, repeat steps 2 through 5 above.
7
To confirm the preset tare, press the COLUMN key.
IGX/IGB Series Operation Manual No. 0203A
IGX Series
3.2 Weighing PLUs
IGB Series
page 21
3