Sanremo Verde Instruction Booklet page 51

Instructions for use and maintenance
12.2 - PROGRAMMING ON THE DISPLAY
To access the programming page, press the centre
of the display with a finger; the following screen is
displayed:
2
1
3
1) Program doses
2) Set coffee water temperature
3) Set the time and program automatic start-up
time, set the day of the week
4) Counter display
5) Move to next page.
6) Machine ON/OFF button.
Fine tuning doses
• Press button (1) to display the following screen:
cc 55
• Operate on the first button panel on the left and
press the button corresponding to the dose to be
programmed, e.g. button (3)
coffee), the corresponding LED will turn on, while
all other LEDs turn off.
The set quantity of coffee is shown in cc on the
screen. Press the "+" or "-" buttons to change the
quantity, then press the "X" button to confirm and
return to the main programming screen.
Setting coffee water temperature in the unit
• Press button (2) to display the following screen:
Temp. Coffee
92.0 °c
02-2014
6
5
4
(single espresso
A
1
197 °F
17 / 29-EN
VERDE
•
The top part "A" shows the unit; the set temperature
value in °C flashes; press the "+" or "-" buttons to
change the temperature, press the "√" button to
confirm the selection and move to setting the tem-
perature of the following unit.
After setting the temperature, press the "√" button
to return to the main programming screen.
Setting the time/automatic start-up and day of
the week
• Press button (3) to display the following screen:
Regolazione ora
A
10 : 56 Mercoledì
B
• This displays the hour "A", minutes "B" and the day
of the week "C".
The value that can be edited is flashing; press the
"+" or "-" buttons to change the value, then press
the "√" button to confirm the selection and move
to the next value to be set; after selecting the day
of the week, press the "√" button to move to the
automatic start-up time programming screen.
Auto on/off
A
On: 06 : 50
• The screen displays the hour "A" and minutes "B";
the hour "A" flashes, press the "+" or "-" buttons to
change the value then press the "√" button to con-
firm the selection and move on to set the minutes.
After setting the minutes, press the "√" button to
confirm the time for automatic start-up and move
to the next screen, where the closing day can be
set.
C
B
EN