Answering And Placing Calls; Answering Calls; Answering Waiting Calls; Using Automatic Call Access - Mitel 8620 User Manual

Answering and Placing Calls

The following instructions describe how to answer and place internal and external calls and how
to use related features.
NOTE

Answering Calls

Your IP phone may be preset to automatically answer incoming internal calls in Handsfree
Mode. To disable Handsfree Mode, see "Using Handsfree Mode" on
Handsfree Mode, you can use your handset or headset to answer incoming calls.
To answer a call:

Answering Waiting Calls

If you receive a call while you are on another call, you hear a "call waiting" tone, the IC or CALL
button flashes, and the display shows the Caller ID information (if available).
To answer a waiting call:

Using Automatic Call Access

Automatic Call Access connects you to incoming internal or external calls when you pick up the
handset or press
flashing IC or CALL button to answer incoming calls.
To use Automatic Call Access for incoming IC calls:
To use Automatic Call Access for incoming external (trunk) calls:
Mitel ® 8620/8622 IP Phone User Guide – Issue 14, June 2010
By default, internal (intercom) calls are assigned to the IC button, and external
calls are assigned to the CALL buttons.
Lift the handset, or press
answer a call in Handsfree Mode. See "Using Handsfree Mode" on
If you are currently on a call, press the flashing IC or CALL button to answer a waiting
call. See "Answering Waiting
Press the flashing IC or CALL button. This action hangs up on the connected call and
connects you to the waiting call. You can also place the first call on hold before you
answer the waiting call. See "Placing Calls On Hold" on
(Speaker). When Automatic Call Access is turned off, you must press the
With the handset on-hook, dial 361 to turn on (or off). AUTO IC ACCESS ON (or OFF)
appears.
With the handset on-hook, dial 360 to turn on (or off). AUTO TRNK ACCESS ON (or
OFF) appears.
Answering and Placing Calls
(Speaker) to answer a call while using a headset, or to
Calls" below.
page 29. After disabling
page 29.
page 30.
Page 19