Dialing Station Speed-Dial Numbers; Deleting Station Speed-Dial Entries - Mitel 8620 User Manual

Dialing Station Speed-Dial Numbers

To dial a Station Speed-Dial number:

Deleting Station Speed-Dial Entries

To delete a Station Speed-Dial entry:
1. With the handset on-hook, dial 383. PROGRAM STN SPD (0-9) OR SCROLL appears.
2. Do one of the following:
3. Press the MUTE button repeatedly until the name is erased, and then press # to
4. Press the MUTE button repeatedly until the number is erased, and then press #. STN
Mitel ® 8620/8622 IP Phone User Guide – Issue 14, June 2010
Do one of the following:
•
Dial 382, and then enter the Station Speed Dial bin (0 to 9). The system dials the
number.
•
Press (Up) or
to select the location and dial the number.
You can also program buttons to dial Station Speed-Dial numbers. See
NOTE "Assigning Speed-Dial Numbers to Programmable Buttons" on
page 26.
•
Press (Up) or
•
Enter the speed-dial bin (0 to 9).
Press # to select the bin.
continue.
SPD BIN # <number> UPDATED appears.
(Down) to scroll through the speed-dial bins, and then press #
(Down) to scroll through the speed-dial bins.
Answering and Placing Calls
Page 25