Minolta PAGEWORKS 20 User Manual page 134

5. Installing the SIMM
6-12
3. Remove the right side cover.
4. Remove the four screws.
5. Open the metal cover.
6. Insert the SIMM all the way into
the upper memory connector at a
45 degree angle, and push the
SIMM up until it snaps into place.
NOTES
When you install two SIMMs, the
first one must be inserted into the
upper memory connector (slot 1).
When you install two different
memory size of SIMM, install the
large size of SIMM into the upper
memory connector (slot 1).