Job Separation - Minolta PAGEWORKS 20 User Manual

Job Separation

Your printer can insert a blank page between print jobs. This may be
helpful when there is more than one person using the printer.
1. Load the separator sheets in tray 1. You don't need to specify
the paper size and the direction of the loaded separator sheet.
2. Press the
Tray1 Paper
mode.
3. Press the
Select
.
SEPARATION
4. Press the
Enter
An asterisk (*) appears at the right of the setting.
The printer returns on-line automatically.
While the printer is
SEPARATION on the control panel.
- If you select
JOB SEPARATION
paper source.
- If selecting
JOB SEPARATION
inserted as a separator sheet between print jobs.
- If you select
MANUAL FEED
.
TION
- If selecting
JOB SEPARATION
1, tray 2 becomes the default paper source.
- When a separator sheet misfeed occurs, the printer does not per-
form jam recovery for a separator sheet.
USEFUL TIP
The printer driver for this printer can also be used to insert a blank
page between print jobs.
For details, See the Printer Driver User's Manual.
key to enter the tray 1 paper size setting
key as many times as necessary to select
key to save your selection.
or
READY OFFLINE,
, you cannot specify tray 1 as the
, the paper loaded in tray 1 is
, you cannot specify
, when the paper source is set to tray
1. Using the Control Panel
the printer displays
JOB SEPARA-
JOB
JOB
3-3