Minolta PAGEWORKS 20 User Manual page 135

5. Installing the SIMM
7. Make sure both metal clips on the
connector are pushed through the
holes on the SIMM.
8. If installing a second SIMM,
repeat steps 6 to 7.
9. Close the metal cover and tighten
the four screws.
Attach the right side cover.
10. Close the upper cover.
11. Connect the power cord to the
printer and then turn the printer
on.
See "Connecting the power
Cord" page 2-9.
See "Turning the Printer ON
and OFF" page 2-10.
6-13