When you want to print on both sides of the paper, the duplex unit is
necessary.
NOTE
You may need to add more memory (an additional 8MB
recommended) to print on both sides of the paper.
- Take the duplex unit out of the shipping box.
- Remove the plastic bag and all shipping materials.
- Turn the printer off and then disconnect the power cord and inter-
face cable from the printer.
2. Installing the Duplex Unit
1. Remove the cover on the back-
side of the printer.
(Use a plus screwdriver.)
2. Attach the two duplex brackets
(included with the duplex unit) to
the backside of the printer in the
holes provided for them.
Press down on them until you
hear a click.
3. Hook the duplex unit onto the
brackets and engage the connec-
tor and gear.
Secure it to the printer with two
screws.
(Use a plus screwdriver.)
NOTE
Hold up the duplex unit with your
hand until you secure it with the
screws.
6-3