Printing A Test Page; Configuration Page - Minolta PAGEWORKS 20 User Manual

To make sure the printer works correctly before connecting the
printer to the computer, print a configuration page according to the
following procedure.

6. Printing a Test Page

1. Load Letter paper into tray 1.
See "Loading Paper in Tray 1"
page 3-29.
2. Using the control panel, select
from the menu
TEST PRINT
mode. Select
CONFIG PRINT
from the item mode. Press the
Enter key to start printing.
See "Test Print" page 3-19.
3. If an error message appears, see
"Understanding Printer Mes-
sages" on page 5-12 for more
information.
2-11