Setting The Hotkey Key Combination; Setting The Osd Hotkey Combination - ATEN KH1508Ai User Manual

Setting the Hotkey key combination

The keys used to enter the Hotkey Mode (see HOTKEY COMMAND MODE,
page 31) can be switched between:
[Num Lock] + [-]
by the following steps:
1. Enter the Hotkey mode with the:
[Num Lock] + [-] or [Ctrl] + [F12]
2. Press .
[H]
After you press [H], the command line displays HOTKEY HAS BEEN
CHANGED for one second; then the message disappears and you
automatically exit Hotkey mode.

Setting the OSD Hotkey combination

The Hotkeys used to access the OSD (see OSD HOTKEY, page 30) can be
switched between
[Scroll Lock], [Scroll Lock], [Ctrl], [Ctrl],
and
[Alt], [Alt]
1. Enter the Hotkey mode with the:
[Num Lock] + [-] or [Ctrl] + [F12]
2. Press .
[T]
After you press
[T]
CHANGED for one second; then the message disappears and you
automatically exit Hotkey mode.
, and
[Ctrl] + [F12]
by the following steps:
, the command line displays HOTKEY HAS BEEN
Chapter 4. OSD Operation
combination
.
combination.
45