Single Station Installation - ATEN KH1508Ai User Manual

Cat 5 high-density kvm over the net
Hide thumbs Also See for KH1508Ai:
Table of Contents

Advertisement

KH1508
i / KH1516
A
A

Single Station Installation

In a single stage installation, there are no additional KVM switches daisy
chained down from the KH1508
installation, refer to the installation diagrams starting on page 15. The numbers
in the diagrams correspond with the numbers of the instruction steps, below:
1. Ground the KH1508
wire to the grounding terminal, and the other end of the wire to a suitable
grounded object.
Note: Do not omit this step. Proper grounding helps to prevent damage to the unit
from surges or static electricity.
2. Plug the the console keyboard, monitor, and mouse into the unit's console
ports. Ports are color coded and marked with icons for easy identification.
Note: You can use any combination of keyboard and mouse connections.
3. If you are using a laptop USB console to control the KH1508
KH1516
i locally, use the laptop USB cable included in the package to
A
connect the laptop to the KH1508
the unit's front panel.
4. Use Cat 5e/6 cable to connect any available KVM port to a KVM adapter
cable that is appropriate for the computer you are installing (see KVM
Adapter Cables, page 6 for details).
Note: To support a resolution of 1280x1024@75Hz, the recommended maximum
distance between the unit and the KVM adapter cable is 50 meters; to
support a resolution of 1600x1200@60Hz, the recommended maximum
distance is 40 meters.
5. Connect the KVM adapter cable to the computer.
Plug the connectors on the KVM adapter cable into the appropriate ports
of the computer you are installing. (See KVM Adapter Cable Installation
Diagrams, page 16 for connection examples.)
6. Plug the LAN or WAN cable into the KH1508
7. Plug the female end of the power cord into the KH1508
power socket; plug the male end into an AC power source.
After the KH1508
A
it is powered up, you can turn on the servers.
14
i User Manual
i / KH1516
A
i / KH1516
A
A
i / KH1516
i is cabled up, you can turn on the power. After
A
i. To set up a single stage
A
i by connecting one end of a grounding
i / KH1516
i's Laptop port, located on
A
A
i / KH1516
A
i /
A
i's LAN port.
A
i / KH1516
i's
A
A

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kh1516ai

Table of Contents