Table of Contents
Advertisement
12
OPERATIONS MODE.
DISPLAY CODE
ON THE BOILER
FAULT CODES.
DISPLAY CODE ON THE BOILER
DESCRIPTION
The boiler is in standby mode awaiting either a central heating call or hot water
demand.
The boiler has a call for central heating but the appliance has reached the desired
temperature set on the boiler.
The boiler has a call for hot water but the appliance has reached the desired
temperature set on the boiler.
The boiler is operating in central heating mode.
The boiler is operating in hot water mode.
The boiler is operating in frost mode.
DESCRIPTION
ACTION
Outside sensor
Reset the appliance - if the boiler fails to operate then please
failure
contact Ideal (if under warranty) or alternatively a Gas Safe
Registered Engineer if outside of the warranty period. In IE
contact a Registered Gas Installer (RGII).
Low mains voltage
Contact a qualified electrician or your electricity provider.
Unconfigured PCB
Unconfigured PCB. Please contact Ideal (if under warranty) or
alternatively a Gas Safe Registered Engineer if outside of the
warranty period. In IE contact a Registered Gas Installer (RGII).
Boiler resets in
1. Turn power off and on at the fused spur.
15 minutes
2. If the boiler fails to operate please contact Ideal (if under
warranty) or alternatively a Gas Safe Registered Engineer if outside
of the warranty period. In IE contact a Registered Gas Installer RGII).
False flame lockout
Reset the appliance - if the boiler fails to operate then please
contact Ideal (if under warranty) or alternatively a Gas Safe
Registered Engineer if outside of the warranty period. In IE
contact a Registered Gas Installer (RGII).
Hide quick links:
Advertisement
Table of Contents
